Honest Crochet Smile Cup Mascot Keychain Amigurumi Pattern

Stitch a tiny, cheerful Honest Crochet Smile Cup mascot keychai an easy, beginner-friendly amigurumi pattern that’s fast, adorable, and gift-ready. Perfect stash-buster with happy vibes everywhere.

Crochet Smile Cup Mascot Keychain. It’s a small, happy cup you can crochet with basic stitches. The pattern is beginner-friendly, with clear steps and simple tips. Use leftover yarn, and most makers can finish one in an evening.

Customize the colors, add a tiny straw or blush, and clip it to a ring or carabiner. It’s lightweight, sturdy, and easy to gift, perfect for adding a little smile to every day.

Uses:

Keychain or zipper pull for bags and backpacks
Quick gift or party favor
Budget-friendly craft fair item

 

Honest Crochet Smile Cup Mascot Keychain Amigurumi Pattern 

Ready to boost your readability and charm at the same time? Then this revised, transition-rich Honest Crochet Smile Cup Mascot Keychain Amigurumi Pattern is for you. First, you’ll get a warm, beginner-friendly guide; next, you’ll move step by step through materials, sizing, and stitching; and finally, you’ll finish with pro tips that make your mini cup look clean, sturdy, and irresistibly cute. Moreover, every section flows naturally, so you can follow along without stopping to guess what comes next. For a visual companion while you crochet, you can also refer to the Honest Crochet Smile Cup Mascot Keychain Amigurumi Pattern on YouTube here:

Level of Difficulty

• Beginner to Confident Beginner.
• Techniques you will use: magic ring (MR), single crochet (sc), increase (inc), invisible decrease (inv dec), slip stitch (sl st), color change, light embroidery, and simple sewing.
• Consequently, if you know the basics of amigurumi, you are fully ready.

Finished Size and Sizing Tips

• Finished height: approximately 2.25–2.75 in (5.5–7 cm).
• Finished width: approximately 2–2.25 in (5–5.5 cm), excluding hardware.
• To size up, simply switch to worsted (4) yarn with a 3.5–4.0 mm hook; to size down, choose sport (2) yarn with a 2.25–2.5 mm hook.
• Importantly, crochet tightly so stuffing doesn’t peek through; therefore, if your fabric looks loose, go down a hook size.

Materials 

• DK (light/3) cotton or cotton blend yarn:
  • Main cup color (e.g., cream): ~10 g (25–30 m).
  • Beverage color (e.g., coffee brown): ~8 g (20–24 m).
  • Face accents: small scraps of black embroidery floss and pink yarn (or blush).
• Crochet hook: 2.75–3.0 mm (US C/2–D/3); choose the smallest that gives a firm fabric.
• Safety eyes: 6 mm (1 pair).
• Stuffing: polyester fiberfill, ~8–12 g.
• Keychain hardware: 25 mm split ring + 40–50 mm chain (lobster clasp optional).
• Notions: stitch marker, tapestry needle, sewing needle, scissors, pins.
• Optional: a tiny drop of fabric glue for knot security.

Special Features

• A neat, flat base so the cup stands.
• A crisp color-change rim that reads as “beverage.”
• A perky mini handle that holds its curve.
• A sweet, centered smile with blush cheeks.
• A discreet attachment point for keychain hardware.

Gauge (Helpful but Flexible)

• About 6–7 sc per 1 in (2.5 cm) with a 3.0 mm hook in continuous rounds.
• If your fabric shows gaps, then reduce your hook size.

Step-by-Step Instructions (US Terms)
Work in continuous rounds unless noted. Additionally, place a stitch marker at the first stitch of each round.

• Step 1: Base Circle (Time: 10–15 minutes)
  To begin, with the beverage color (brown), MR; 6 sc into ring (6).
  Round 2: inc around (12).
  Round 3: (sc, inc) x6 (18).
  Round 4: (2 sc, inc) x6 (24).
  Round 5: (3 sc, inc) x6 (30).
  As a result, you now have a flat, sturdy base. If you want a slightly larger cup, then add Round 6: (4 sc, inc) x6 (36).
• Step 2: Form the Cup Walls (Time: 20–30 minutes)
  Next, create a clean edge: work the next round in back loops only (BLO) to turn the wall up.
  Round 6 (or 7 if you added the larger base): BLO sc around (30 or 36).
  Rounds 7–10: sc around (same stitch count) to build height.
  Optionally, for a gentle taper, then do: Round 11: (8 sc, inv dec) x3 (27); Round 12: sc around (27).
  Because BLO defines the base, your cup won’t wobble.
• Step 3: Color-Change to Main Cup (Time: 8–12 minutes)
  Before you continue, prepare to switch to the main cup color (cream).
  On the next round, complete the last pull-through of the previous stitch with the new color; consequently, the color change looks clean. Then sc around (27 or 30/36, matching your count).
  Work 2–3 more rounds in the main color to reach your preferred height.
  Additionally, stop one round earlier for a squat cup, or add one round for a taller look.
• Step 4: Face Placement and Embroidery (Time: 10–12 minutes)
  At this point, pause shaping and add the face so you can adjust easily.
  Place safety eyes between Rounds 8–9 (from the base), 5–6 stitches apart; however, hold off on locking the backs.
  With black floss, embroider a small curved smile centered between the eyes; then add pink cheeks just below each eye.
  Once satisfied, firmly attach the eye backs. As a result, the expression will stay consistent while you finish.
• Step 5: Stuff and Shape the Rim (Time: 10–15 minutes)
  Now lightly stuff the cup with small tufts, starting at the edges and moving inward; therefore, the sides remain smooth.
  When you reach one round below the final height, begin shaping the close:
  Next Round: (sc, inv dec) around to reduce to ~18–20 sts.
  Final Round: inv dec around to ~12–14 sts.
  Finally, fasten off with a long tail, weave through the front loops of each remaining stitch, and pull tight to close. Then secure the tail inside.
• Step 6: Make and Attach the Handle (Time: 12–15 minutes)
  Meanwhile, with the main color, ch 8–10; then sl st into the back bump of each ch to the end. Fasten off with a long tail.
  Shape into a gentle C, pin to the side opposite the keychain attachment point, and sew through at least two rows for strength.
  Consequently, your handle will hold its form without drooping.
• Step 7: Install the Keychain Hardware (Time: 5–8 minutes)
  For a sleek finish, choose an attachment point at the back/top of the cup.
  Usinga strong thread (or doubled yarn), stitch the last chain link to the inside of the rim; then bring the link out at the back so the join is hidden.
  Attach the split ring and lobster clasp if desired. Therefore, the hardware looks clean and feels secure.
• Optional Step 8: Whipped Topping or Lid (Time: 8–12 minutes)
  Alternatively, add a playful topper. With white yarn, ch 12–14; sl st in second ch from hook; in the next ch, work [sc, hdc, dc]; then alternate [dc, hdc, sc, sl st] to create a wavy strip.
  Coil into a swirl and tack along the rim.
  Or, for contrast, crochet a small flat circle “lid” and stitch on lightly.

Total making time: approximately 60–90 minutes for the basic cup; 90–110 minutes including embellishments and hardware.

Common Mistakes and Easy Fixes

• Fabric gaps: If holes appear, then go down a hook size or tighten tension; furthermore, use invisible decreases to avoid gaps when shaping.
• Wobbly base: If your base won’t lie flat, then recheck that the increases are evenly spaced; BLO in the first wall round also locks the base edge.
• Messy color change: Always finish the last stitch of the old color with the new color; consequently, the transition line stays neat.
• Misplaced features: Before locking eyes, first pin the cheeks and smile; then adjust until the face looks balanced.
• Lumpy stuffing: Instead of big handfuls, add small tufts; as a result, the sides remain smooth and round.

Variations to Try

• Matcha or tea cup: Swap the beverage layer to pastel green or amber; consequently, one pattern yields many flavors.
• Latte art topper: For example, stitch a tiny heart on a white “foam” circle and sew it to the rim.
• Winking face: Alternatively, embroider one eye as a “V” and the other as a dot.
• Straw or stir stick: Create a short i-cord or a firm chain (dab of fabric glue), then anchor at the rim.
• Seasonal edits: Red-and-white holiday cup, or pink cup with heart cheeks for Valentine’s Day.

Tutor Suggestions and Learning Boosters

• First, mark your first stitch every round with a locking stitch marker; therefore, counts stay accurate.
• Next, practice the magic ring until it closes neatly; consequently, your base looks professional.
• Moreover, learn the invisible decrease for smooth shaping on the outside.
• If you prefer visual instruction, then pause-and-crochet alongside the video tutorial: 

Finishing Tips for a Polished Look

• After closing, gently “massage” the stitches with your needle to even the silhouette; as a result, the sides look uniform.
• Lightly steam-block from a distance to relax fuzz (avoid direct heat on acrylic).
• Secure interior knots with a tiny dab of fabric glue; then let them dry completely.
• Double-stitch the chain attachment and verify the split ring is fully closed; consequently, your keychain withstands daily use.
• Finally, weave ends in a zigzag path so they won’t work loose over time.

SEO-Friendly Recap
If you’re searching for a cute, quick, and beginner-ready amigurumi, then this Honest Crochet Smile Cup Mascot Keychain Amigurumi Pattern delivers clean transitions, clear steps, and charming results. From accurate materials and exact measurements to timed steps and easy variations, every section flows logically; therefore, you can finish with confidence.